Frequently Asked Questions
NOCO Lithium Powersport Batteries
The warranty is 5 years from the proof of purchase or manufacture date (based on serial number).
NOCO Powersport's battery chemistry is Lithium Iron Phosphate (LiFePO4).
| NLP5 | 2 Amp-Hours | 25.6 Watt-Hours |
| NLP9 | 3 Amp-Hours | 38.4 Watt-Hours |
| NLP14 | 4 Amp-Hours | 51.2 Watt-Hours |
| NLP20 | 7 Amp-Hours | 89.6 Watt-Hours |
| NLP30 | 7.8 Amp-Hours | 99.84 Watt-Hours |
| NLP5 | 4.2 Amp-Hours |
| NLP9 | 12 Amp-Hours |
| NLP14 | 13 Amp-Hours |
| NLP20 | 19 Amp-Hours |
| NLP30 | 32 Amp-Hours |
| NLP5 | 250 Amp (Peak) |
| NLP9 | 400 Amp (Peak) |
| NLP14 | 500 Amp (Peak) |
| NLP20 | 600 Amp (Peak) |
| NLP30 | 700 Amp (Peak) |
| NLP5 | 5 |
| NLP9 | 9 |
| NLP14 | 14 |
| NLP20 | 20 |
| NLP30 | 30 |
NOCO Powersport batteries can operate within the temperature range -4ºF to 140ºF (-20ºC to 60ºC).
NOCO Powersport batteries should not be stored below -4ºF (-20ºC) and not exceed 140ºF (60ºC) for any reason.
NOCO Powersport batteries are rated IP66, waterproof rated.
| NLP5 | 1.5 lbs (0.69 kg) |
| NLP9 | 2.29 lbs (1.03 kg) |
| NLP14 | 2.58 lbs (1.17 kg) |
| NLP20 | 3.73 lbs (1.7 kg) |
| NLP30 | 5.0 lbs (2.27 kg) |
Yes. You can use a NOCO Boost device on any NOCO Lithium batteries. Enabling Manual Override might be needed due to the BMS.
You can install the battery in any direction except with the connectors facing downwards.
No. NOCO Powersport batteries are designed as starting batteries. Their BMS is not designed for series or parallel applications, and connecting them in series or parallel could damage the BMS and internal battery cells.
The Battery Management System (BMS) monitors the internal lithium-ion cells and disconnects them if a fault occurs. The Dynamic BMS will protect against Over-Charge, Over-Discharge, Extreme Heat, Extreme Cold, Short Circuit, and Over Current.
To recharge NOCO Powersport batteries, connect a compatible lithium-ion charger to the positive (+) and negative (-) battery terminals. The recommended charging voltage is 14.6-volts. The product uses advanced lithium-ion technology that allows for the rapid charging of the internal lithium-ion cells.
This is a table of the charging times, based on 100% depth-of-discharge (DOD), using recommended NOCO Genius Smart Battery Chargers:
| GENIUS1 | GENIUS2 | GENIUS5 | GENIUS10 | |
|---|---|---|---|---|
| NLP5 | 2 hours | 1 hours | 24 minutes | –– |
| NLP9 | 3 hours | 1.5 hours | 36 minutes | –– |
| NLP14 | 4 hours | 2 hours | 48 minutes | 24 minutes |
| NLP20 | 7 hours | 3.5 hours | 1.4 hours | 42 minutes |
| NLP30 | 8 hours | 4 hours | 1.6 hours | 48 minutes |
The following table provides the battery fitment and the corresponding spacers and foam needed to achieve proper height, width and length for retrofit applications.
NLP5
| BCI Sizes | Yuasa Sizes | Spacers |
|---|---|---|
| BTZ5S BTX4L-BS |
YTZ5S-BS YTX4L-BS |
None |
| BTX5L-BS BTZ7S |
YTX5L-BS YTZ7S |
(1) 20 mm |
| BTZ8V BTX7L-BS |
YTZ8V YTX7L-BS |
(1) 20 mm, (1) 24 mm |
The following table provides the battery fitment and the corresponding spacers and foam needed to achieve proper height, width and length for retrofit applications.
NLP9
| BCI Sizes | Yuasa Sizes | East Penn | Spacers |
|---|---|---|---|
| BTX7A-BS | YTX7A-BS | None | |
| BTX9-BS | YTX9 | (1) 12.5 mm | |
| BTR9-BS | YTX9-BS | ETX9 | (1) 12.5 mm |
The following table provides the battery fitment and the corresponding spacers and foam needed to achieve proper height, width and length for retrofit applications.
NLP14
| BCI Sizes | Yuasa Sizes | East Penn | Spacers |
|---|---|---|---|
| BTZ10S | YTZ10S | None | |
| BT12A-BS | YT12A-BS | (1) 12.5 mm | |
| BTZ12S BTZ14S |
YTZ12S YTZ14S |
(1) 17 mm | |
| BTX12-BS | YTX12 YTX12-BS |
ETX12 | (1) 12.5 mm (1) 17 mm |
| BTX14 BT14B-4 BTX14-BS |
YTX14 YTX14-BS YTX14H YTX14H-BS GYZ16H KMX14-BS |
ETX14 ETX14L |
(2) 25 mm |
| BTX16-BS BTX16-BS-1 BTX20CH-BS |
YTX16-BS YTX16-BS-1 YTX20CH YTX20CH-BS |
(1) 17 mm (2) 25 mm |
|
| B16A-AB | HYB16A-AB | (1) 12.5 mm (3) 25 mm |
The following table provides the battery fitment and the corresponding spacers and foam needed to achieve proper height, width and length for retrofit applications.
NLP20
| BCI Sizes | Yuasa Sizes | East Penn | Spacers |
|---|---|---|---|
| BTX15L BTX15L-BS |
YTX15L YTX15L-BS |
None | |
| BTX20L BTX20HL-BS BTX20L-BS BTZ20L |
GYZ20L GYZ20HL YTX20HL YIX20HL YTX20L YTX20L-BS YTX20HL-BS |
ETX20L | (1) 12 mm (1) 15 mm |
| B16L-B | YB16HL-A-CX YB16L-B SYB16L-B |
ETX16 ETX16L |
(1) 12 mm (1) 15 mm (2) 7.5 mm Foam |
| YTX20HL-PW YIX20HL-BS YTX20HL-BS-PW |
(3) 15 mm | ||
| B18L-A | (2) 15 mm (1) 7.5 mm Foam |
||
| B50-N18L-A3 | Y50-N18L-A3 | (2) 15 mm (4) 7.5 mm Foam |
|
| B16CL-B | YB16CL-B | (3) 15 mm (2) 7.5 mm Foam |
The following table provides the battery fitment and the corresponding spacers and foam needed to achieve proper height, width and length for retrofit applications.
NLP30
| BCI Sizes | Yuasa Sizes | East Penn | Spacers |
|---|---|---|---|
| BTX30L-BS BTX30L |
GYZ32HL YIX30L |
ETX30L | None |
8 AM to 7 PM EST
The NOCO Company 30339 Diamond Parkway #102 Glenwillow, OH 44139-5400 United States of America
