Understanding the Interface on GBX55
1. Power LED
Illuminates White when unit is “On”. Will illuminate orange after the 60-second timeout countdown until the clamps are removed from the Car Battery or the GBX55 is power cycled ‘off’ and back ‘on’ again.
2. Power Button
Push to turn unit “on” & “off” or restart boost after 60-second timeout.
3. Reverse Polarity Error LED
Illuminates red if reverse polarity is detected.
4. Cold LED
Illuminates solid or flashes blue when internal temperature is too low.
5. Hot LED
Illuminates solid or flashes red when internal temperature is too high.
6. Error LED
Blinks “on” and “off” in various sequences (from 1 to 6 blinks) to convey error conditions.
7. Internal Battery Level
Indicates the charge level of the internal battery.Learn More.
8. Light Mode Button
Toggles the ultra-bright LED light through 7 light modes: 100% > 50%>10%>SOS>Blink>Strobe>OffLearn More.
9. Boost LED
Illuminates white when boost is active. If the unit is connected properly to a battery, the GBX55 will automatically detect a battery and go into boost mode (LED flashes white when manual override feature is active).
10. Manual Override Button
To enable, push and hold for three (3) seconds. WARNING: Disables safety protection and manually forces Boost «On».Only for use when a battery voltage is too low to be detected.Learn More.
11. Fast Charge LED
Illuminates white when fast charge is active. Fast charge LED turns red (solid/blinking) when there is an error.Learn More.
8 AM to 7 PM EST
The NOCO Company 30339 Diamond Parkway #102 Glenwillow, OH 44139-5400 United States of America
