G4 Overview
Read below for an overview on the Genius G4 Smart Charger.
1.) Master Power LED
The Master Power LED indicates that there is power being drawn into the four banks.
2.) Bank Standby LED
The Bank Standby LED light indicates that the specific bank is in standby mode. No charging is happening when this light is illuminated.
3.) Charge LEDs
The Charge LED indicates the connected battery’s state-of-charge. It will "breathe" red while charging, and turn solid green when the battery is fully charged.
4.) 12V Cold/AGM LED
The 12V Cold/AGM Mode LED indicates that the charger is in 12V cold/AGM mode. High-end vehicles that require more power for tasks (such as heated seats, heavy sound systems, power-hungry engines, etc.) may carry AGM batteries. Double check that your battery is an AGM battery before using this mode.
5.) 6V Norm LED
The 6V Norm Mode LED indicates that the smart charger is in 6V norm mode. Light vehicles (golf carts, some ATVs, etc.), tractors, and some small commercial use vehicles use 6V batteries. Double check that your battery is a 6V battery before using this mode.
6.) 12V Cold/AGM LED
The 12V Cold/AGM Mode LED indicates that the charger is in 12V cold/AGM mode. High-end vehicles that require more power for tasks (such as heated seats, heavy sound systems, power-hungry engines, etc.) may carry AGM batteries. Double check that your battery is an AGM battery before using this mode.
7.) 12V Norm LED
The 12V LED indicates that the charger is in 12V mode. This is the most common car battery voltage.
8.) Error LED
All error conditions are displayed with the Error LED and Standby LED flashing back and forth. The number of flashes between each pulse denotes a potential Error Condition (except reverse polarity and low-voltage battery).
9.) Mode Button
The Mode Button allows for switching between different charging options.
10.) Bank Number
The Bank Number indicates the port which is being used for charging.
11.) DC Outputs
The AC power from the outlet is converted to DC power and directed to the male X-Connect ends.
8 AM to 7 PM EST
The NOCO Company 30339 Diamond Parkway #102 Glenwillow, OH 44139-5400 United States of America
