NOCO - G4 Charging Modes - Support

G4 Charging Modes

Read below to learn about the different charging modes on the G4 Smart Charger.

 

1.) Standby Mode

In Standby mode, the G4 Smart Charger is not charging or providing any power to the battery. Energy Save is activated during this mode, drawing microscopic power from the electrical outlet. When selected, an orange LED will illuminate.

2.) 12V Norm Mode

For charging 12-volt Wet Cell, Gel Cell, Enhanced Flooded, Maintenance-Free and Calcium batteries. When selected, a white LED will illuminate. 14.5V | 1.1A | Up To 40Ah Batteries

3.) 12V Cold/AGM Mode

For charging 12-volt batteries in cold temperatures below 50ºF (10ºC) or AGM batteries. When selected, a blue LED will illuminate. 14.8V | 1.1A | Up To 40Ah Batteries

4.) 6V Norm Mode

For smart charging 6-volt Wet Cell, Gel Cell, Enhanced Flooded, Maintenance-Free and Calcium batteries. When selected, a white LED will illuminate. 7.25V | 1.1A | Up To 40Ah Batteries

5.) 12V Lithium Mode

For charging 12-volt lithium-ion batteries, including lithium iron phosphate. When selected, a blue LED will illuminate. 14.2V | 1.1A | Up To 40Ah Batteries

6.) Master Power Button

When pressed, a white LED light will illuminate and give AC power to the four banks.

Chat 8AM-5PM (MST)
Monday-Friday
Average Response Within 1
Business Day
Request A Callback

Request A Callback

It's OK to respond via email for a faster response.

Click for emergency contact information.

Emergency Contact Information

1.800.456.6626 8AM-5PM (EST)
Monday-Friday
For non-urgent support, please Request A Callback
For Fastest Response, Use 'Chat' or 'Send a Message' Above
Write Us

The NOCO Company 30339 Diamond Parkway #102 Glenwillow, OH 44139-5400 United States of America

Request A Callback

Request A Callback

It's OK to respond via email for a faster response.

Click for emergency contact information.

Emergency Contact Information

1.800.456.6626 8AM-5PM (EST)
Monday-Friday
For non-urgent support, please Request A Callback
For Fastest Response, Use 'Chat' or 'Send a Message' Above