G1100 Overview
Read below for an overview on the G1100 Smart Charger.
1.) Mode Button
The Mode Button allows for switching between different smart charging options.
2.) Error LED
All error conditions are displayed with the Error LED and Standby LED flashing back and forth. The number of flashes between each pulse denotes a potential Error Condition (except reverse polarity and low-voltage battery).
3.) Charge LEDs
The Charge LED indicates the connected battery’s state-of-charge. It will "breathe" red while charging, and turn solid green when the battery is fully charged.
4.) Standby LED
The Standby LED indicates that the charger is in standby mode. No charging is happening when this light is illuminated.
4.) Standby LED
The Standby LED indicates that the charger is in standby mode. No charging is happening when this light is illuminated.
5.) AC Input
The AC Input draws electricity from any standard outlet into the Genius Charger.
6.) X-Connect Male Out
The X-Connect male end allows for a variety of accessories to be connected individually.
7.) DC Output
The AC power from the outlet is converted to DC power and directed to the male X-Connect end.
8.) 12V Mode LED
The 12V LED light indicates that the charger is in 12V mode. This is the most common car battery voltage.
9.) 12V Lithium Mode LED
The 12V Lithium Mode LED indicates that the charger is in 12V lithium mode. Some motorcycles and electric cars carry lithium batteries. Double check that your battery is a lithium battery before using this mode.
10.) 12V Cold/AGM Mode LED
The 12V Cold/AGM Mode LED indicates that the charger is in 12V cold/AGM mode. High-end vehicles that require more power for tasks (such as heated seats, heavy sound systems, power-hungry engines, etc.) may carry AGM batteries. Double check that your battery is an AGM battery before using this mode.
11.) 6V Norm Mode
The 6V Norm Mode LED indicates that the charger is in 6V norm mode. Light vehicles (golf carts, some ATVs, etc.), tractors, and some small commercial use vehicles use 6V batteries. Double check that your battery is a 6V battery before using this mode.
8 AM to 7 PM EST
The NOCO Company 30339 Diamond Parkway #102 Glenwillow, OH 44139-5400 United States of America
