Charging Your ChargeLight
Charge the device with the included USB speed cable and a NOCO 10-watt power adapter (included) or a reliable third-party USB cable and 10W-watt power adapter that are compatible with USB 2.0 or power adapters compliant with one or more of the following standards EN 301489-34, IEC 62684, YD/T 1591-2009, CNS 15285, ITUL.1000, or another applicable mobile phone power adapter interoperability standard. We emphasize 10-watt over a standard 5-watt power adapter because with a 5-watt power adapter the ChargeLight will replenish at half of the speed for which it was designed and engineered.
Some aftermarket power adapters are low in quality, and may present a serious electrical risk that may result in injury to you or the device. If using a third party USB power adapter, please contact the manufacturer(s) to find out if your power adapter complies with the above standards. Using damaged cables or chargers, or charging when moisture is present, can cause electric shock. Using generic or third-party power adapter may shorten the life of your device or cause the device to malfunction. NOCO is not responsible for the user’s safety when using accessories or supplies that are not approved by NOCO. When using a NOCO USB Power Adapter to charge the device, make sure that the AC plug is fully inserted into the adapter before you plug it into a power outlet. Power adapters may become warm during normal use, and prolonged skin contact may cause bodily injury. Always allow adequate ventilation around power adapters when using them.
To ensure maximum battery life, avoid charging your device for more than a week as overcharging may shorten battery life. Over time, an unused device will discharge and must be recharged before use. Disconnect the charger from power sources when not in use. Use the device only for their intended purposes.
8 AM - 4 PM
The NOCO Company 30339 Diamond Parkway #102 Glenwillow, OH 44139-5400 United States of America