GB10 How To

GB10

Support.

GB10

HOW TO JUMP START.

Media

ATTACH CLAMPS.

Media

POWER ON.

Media

START VEHICLE.

Media

POWER OFF.

Or power off/on to reset.

GB10

FAQ



GB10

LEDs

Media
Media

Power LED

Illuminates White when unit is "on".

Media

Error LED

Illuminates Red if reverse polarity is detected. Blinks “on” and “off” when internal battery temperature is too high.

Media

Charge LEDs

Indicates the charge level of the internal battery.

Media

Boost LED

Illuminates White when Boost is active. LED flashes White when Manual Overide feature is active.

GB10

Buttons

Media
Media

Power Button

Push to turn unit "on" and "off".

Media

Light Mode

Toggles the ultra-bright LED light through 7 light modes: 100% > 50% > 10% > SOS > Blink > Strobe > Off

Media

Manual Override

To enable, push and hold for three (3) seconds. WARNING: Disables safety protection and manually forces Boost "On". Only for use when a battery is too low to be detected.

Boost

TROUBLESHOOTING.

ERROR

REASON / SOLUTIONS

Error LED: Solid Red

Error LED: Solid Red

Reverse polarity/Reverse the battery connections.

Error LED: Blinking Red w/Cables Connected Properly

The internal battery is too hot/ Allow the unit to cool. Bring the unit into cooler environment.

Boost Light Does Not Come On w/Cables Connected Properly

Connected battery is below 2-volts/ Remove all loads, and try again, or use Manual Override Mode.

GB10 Manual Override

GB10

MANUAL OVERRIDE

PUSH AND HOLD FOR 3 SECONDS.

WARNING: Disables safety protection and manually forces Boost “On”. Only for use when a battery voltage is too low to be detected.

Connect, Charge, and Store.

GB10 Accessories

The GB10 is compatible with an array of NOCO accessories. Connect to your motorycle battery more easily by mounting the GBC007 eyelets, or charge more quickly with the NUSB211NA charging adapter. Store and protect your GB10 with the GBC013.