AIR20 How To

AIR20

Support.

Easy To Use.

Media

CONNECT TO BATTERY.

Connect the POSITIVE battery clamp from the portable inflator to the POSITIVE ungrounded battery terminal. Connect the NEGATIVE battery clamp from the portable inflator to the NEGATIVE battery terminal.

Media

CONNECTING AIR HOSE.

Connect the air hose on the AIR20 to the tire before starting inflation. The air hose will screw onto the tire's air valve. No tools are necessary and should be hand tightened.

Media

SET PSI.

To set the pressure, press the < or > buttons. The minimum pressure that can be set is 15.0 PSI. For applications requiring less than 15.0 PSI, it is recommended to use Manual Mode.

Media

POWER ON.

Power button is pressed, the compressor will turn on and will display the actual pressure and the “SET” LED will turn off. The compressor will turn off when the desired pressure has been reached.

AIR20

Intuitive Pressure Gauge.

Media
Media

Set Pressure

When the display is in pressure set mode the “SET” LED will illuminate. Use the arrow buttons to set the desired pressure.

Media

Actual Pressure

When the “POWER” button is pressed, the compressor will begin inflating, the “SET” LED will turn off and the actual pressure will be displayed.

Media

Change Units

To change units of pressure, hold both arrow buttons simultaneously for 3 seconds, use either arrow button to cycle through units.

Media

Auto-Shutoff

Auto-shutoff works when pressure is above 15 PSI. Simply set the pressure and start inflating. AIR will shut off when the desired pressure is reached.

Media

Manual Mode

When pressure is below 15 PSI, use manual mode. Set pressure to 0.0 and press the "POWER" button. AIR will run until the "POWER" button is pressed again.

Media

Error - Hot

Internal temperature is too high, the compressor will shut off. Wait for the unit to cool down before powering on again.

Media

Error - Cold

Temperature is too cold, the compressor will shut off. Compressor can resume once temperature is back within limits.

AIR20

Buttons.

Media
Media

Power Button

Push to start or stop inflating.

Media

Arrow Buttons

Hold both Arrow Buttons to begin changing the pressure units. When LED Display is on, use the Arrow Buttons to change the set pressure.

Media

Light Mode Button

Toggles the ultra-bright LED light through 6 light modes: 100% > 50% > 10% > SOS > Blink > Off.

AIR

1 YEAR WARRANTY.

All NOCO Air Portable Air Compressors come with a limited 1 Year warranty. Register your product after purchasing to qualify for the applicable warranty.