GX Series Charge Mode LEDs
1.) Standby
In Standby mode, the charger is not charging or providing any power to the industrial battery. Energy Save is activated during this mode, drawing microscopic power from the electrical outlet. When selected, an orange LED light will illuminate.
2.) Charge LEDs
The charger has four (4) Charge LEDs per bank - 25%, 50%, 75% and 100%. These Charge LEDs indicate the connected battery(s) state-of-charge (SOC).
3.) 24V Normal
For smart chargingWet Cell, Gel Cell, Enhanced Flooded, Maintenance-Free and Calcium batteries. When selected, a white LED will illuminate.
4.) 24V Cold/AGM
For charging industrial batteries in cold temperatures below 50ºF (10ºC) or AGM batteries. When selected, a blue LED will illuminate.
5.) AGM+
For charging advanced AGM batteries, which requires a higher than normal charging voltage. When selected, a blue LED will illuminate.
6.) 24V Lithium-Ion
For charging lithium-ion batteries, including lithium iron phosphate. When selected, a blue LED will illuminate.
7.) 24V Repair Mode
An advanced industrial battery recovery mode for repairing and storing, old, idle, damaged, stratified or sulfated batteries. When selected, a red LED will illuminate and flash.
8.) 24V Supply Mode
Converts to a DC power supply. When selected, a red LED will illuminate.
9.) Error LED
All Error Conditions are displayed with the Error LED and Standby LED flashing back and forth. The number of flashes between each pulse denotes a potential Error Condition (except reverse polarity and low-voltage battery).
8AM to 4PM PDT
The NOCO Company 30339 Diamond Parkway #102 Glenwillow, OH 44139-5400 United States of America
