Using Supply Mode on GeniusPRO
Supply Mode converts GeniusPRO chargers to a constant voltage DC power supply. It can be used to power 12VDC and devices, tire inflators, seat heaters and more. As a power supply, it can also be used to retain a vehicle’s on-board computer settings during battery repair or replacement.
13.6V Supply (12V Supply) provides 13.6-volts up to 25A. Charger output voltage will drop if output load exceeds the 25A current limit.
27.2V Supply (24V Supply) provides 27.2-volts up to 12.5A. Charger output voltage will drop if output load exceeds the 12.5A current limit.
To activate Supply Mode:
13.6V Supply (12V Supply) provides 13.6-volts up to 25A. Charger output voltage will drop if output load exceeds the 25A current limit.
27.2V Supply (24V Supply) provides 27.2-volts up to 12.5A. Charger output voltage will drop if output load exceeds the 12.5A current limit.
WHEN USING SUPPLY MODE ALL SAFETY FEATURES WILL BE DISABLED.
To activate Supply Mode:
- - Disconnect NOCO GeniusPro from any battery.
- - Press and hold the Mode Button for approximately 3 seconds. The 12V SUPPLY icon should illuminate.
- - To continue to 24V Supply Mode press the Mode Button once to switch from 12V Supply to 24V Supply.
Watch the video below to learn more.
Chat
Monday through Friday
8 AM to 7 PM EST
8 AM to 7 PM EST
Follow Us
Write Us
The NOCO Company 30339 Diamond Parkway #102 Glenwillow, OH 44139-5400 United States of America
Since 1914