G26000 Charging Modes
Read below to learn about the different charging modes on the G26000 Smart Charger.
1.) 12V Norm Mode
For charging 12-volt Wet Cell, Gel Cell, Enhanced Flooded, Maintenance-Free and Calcium batteries with the G26000 Smart Charger. When selected, a white LED will illuminate. 14.5V | 26A | Up To 500Ah Batteries
2.) 12V Cold/AGM Mode
For charging 12-volt batteries in cold temperatures below 50ºF (10ºC) or AGM batteries. When selected, a blue LED will illuminate. 14.8V | 26A | Up To 500Ah Batteries
3.) 24V Norm Mode
For charging 24-volt Wet Cell, Gel Cell, Enhanced Flooded, Maintenance-Free and Calcium batteries. When selected, a white LED will illuminate. 29V | 13A | Up To 250Ah Batteries
4.) 24V Cold/AGM Mode
For charging 24-volt batteries in cold temperatures below 50ºF (10ºC) or AGM batteries. When selected, a blue LED will illuminate. 29.6V | 13A | Up To 250Ah Batteries
5.) 12V Repair Mode
An advanced battery recovery mode for repairing and storing, old, idle, damaged, stratified or sulfated batteries. When selected, a red LED will illuminate and flash. 16.5V | 1.5A | Any Capacity
6.) 13.6V Supply Mode
Converts to a DC power supply for powering any 12VDC device, like a tire inflator, oil changer, or as a memory retainer when replacing a battery. When selected, a red LED will illuminate. 13.6V | 5A | Max 6A
7.) 16V AGM Racing Mode
For smart charging 16-volt AGM batteries, which are commonly used in racing vehicles. When selected, a blue LED will illuminate. 19.6V | 20A | Up To 250Ah Batteries
8.) 16V Lithium Racing Mode
For charging 16-volt lithium-ion batteries, including lithium iron phosphate, which are commonly used in racing vehicles. When selected, a blue LED will illuminate. 19.45V | 20A | Up To 250Ah Batteries
9.) 12V AGM+ Mode
For charging 12-volt advanced AGM batteries, which requires a higher than normal charging voltage. When selected, a blue LED will illuminate. 15.5V | 26A | Up To 500Ah Batteries
10.) 12V Lithium Mode
For charging 12-volt lithium-ion batteries, including lithium iron phosphate. When selected, a blue LED will illuminate. 14.2V | 26A | Up To 500Ah Batteries
11.) Standby Mode
In Standby mode, the charger is not charging or providing any power to the battery. Energy Save is activated during this mode, drawing microscopic power from the electrical outlet. When selected, an orange LED will illuminate.
12.) Jump Charge
Delivers 20A for five (5) minutes to jumpstart a dead vehicle battery. When selected, a white LED light will illuminate. (RED Manual Mode). 5Min | 30A | Up To 400Ah Batteries
8 AM to 7 PM EST
Closed Tuesday and Wednesday
The NOCO Company 30339 Diamond Parkway #102 Glenwillow, OH 44139-5400 United States of America
