Connecting Custom Cables to GX Industrial Chargers
Read below for a guide on installing custom cables on the NOCO GX Series Industrial Chargers.
1.) Remove Faceplate
Using an Allen wrench (also known as a hex key), remove two bolts which are holding down the red faceplate.
2. Unscrew Cable Wire Locks
Using a Phillips head screwdriver, remove the negative (-) and positive (+) wires of the connected cable.
3. Remove Cable Lock
Using an Allen wrench (hex key), remove four bolts which are securing the black cable lock.
4. Secure Wires
Lock in the new cable using a Phillips head screwdriver. Be sure to connect the black wire to the negative (-) port, and the red wire to the positive (+) port.
5. Lock In New Cable
Using an Allen wrench (hex key), replace the four bolts which secure the black cable lock.
6. Replace Faceplate
Using an Allen wrench (hex key), replace the two bolts which hold down the red faceplate.
Monday - Tuesday- 8AM- 2PM (MST)
The NOCO Company 30339 Diamond Parkway #102 Glenwillow, OH 44139-5400 United States of America